Fully Jarvis Standing Desk Review: An Office Buyer's Honest FAQ (2026 Pricing)

Let me start with who I am: I'm the person you call when your desk won't go up or down. For the past five years, I've managed purchasing for a 400-person company across three locations. That means I've ordered… gosh, around 40-50 standing desks in that time, and most of them are Fully's Jarvis. When we did a company-wide ergonomics push in 2024, the Jarvis is what I standardized on. This isn't a sponsored review—we paid real money for these desks, and these are my honest answers to the questions I actually get asked.

One caveat before we dive in: prices change. What I'm quoting is based on our 2024-2025 orders and recent checks of Fully's site. Treat these as ballparks, not quotes, and verify the current pricing before you build a budget proposal.

Is the Fully Jarvis worth the price?

Yes—and I'll give you the real-world reason. In 2023, we piloted eight desks from a budget brand to test whether we could save money on a bigger rollout. The price was about $400 less per desk. Within six months, two of the eight had motor problems. One desk just stopped rising entirely, and that employee's setup was down for almost a week while we sorted out the warranty claim.

The Jarvis desks we've had running daily since 2022? Zero motor failures. Zero structural issues. When you're buying for a whole company, reliability is everything. A broken desk isn't just an inconvenience—it becomes a complaint that reaches my manager, and I'm the one explaining why I chose a cheaper brand. There's something satisfying about standardizing on equipment that just works. No more 3am worry sessions about whether a rollout is going to fail.

How much does a Fully Jarvis cost in 2026?

Ballpark figures from our orders:

• Frame only: $500-650
• Full desk, laminate top: $750-950
• Full desk, bamboo top: $850-1,100
• L-shaped or larger: $1,000-1,400

We negotiated about 12% off on a 15-desk bulk order in 2024. I want to say prices haven't jumped dramatically since then, but I don't have a fresh 2026 quote in front of me—don't quote me on that. Check the site.

And here's a tip that saved us real money: compare total costs, not just list prices. When I ran our office equipment spending through a variance calculator last year, I found one location was paying $180 more per identical desk than another because they'd ordered through a reseller instead of directly. Centralize those purchases.

Bamboo, laminate, or hardwood: which top should we pick?

Most buyers assume bamboo is the best because it's the premium option. But the right answer depends on where the desk is going.

Laminate is the workhorse. It resists spills, handles harsh cleaning chemicals, and costs less. Our call center has laminate Jarvis desks that still look respectable after two years of constant use.

Bamboo is for spaces where looks matter. It genuinely warms up a room—we used it in our executive wing and client-facing conference areas. And if sustainability is a priority, bamboo is a renewable material that grows quickly. Per FTC Green Guides (ftc.gov), environmental claims need evidence behind them, and Fully documents their bamboo sourcing rather than just slapping a green label on it.

Hardwood is hard to justify. It runs roughly 20% more than bamboo, and once a desk is loaded with monitors and paperwork, most people can't tell the difference. Unless you have a specific aesthetic requirement, save the money.

Does the Jarvis wobble at standing height?

Short answer: no, not in a way that affects normal work. Our desks sit at about 42 inches for standing employees, and at that height they're solid for typing, video calls, all of it. You can create a slight flex if you deliberately rock the desk side to side, but that's not something that happens during real work.

The honest caveat: we have two employees over 6'3" who run the desk near max height. They notice a bit of sway. It hasn't made either of them stop using the standing function, but it's real, and I'd rather tell you that upfront than have you think I was hiding it.

The Jarvis has a crossbar design that handles this better than other desks we tested. But physics is physics. No desk is 100% rigid at full extension.

How does Fully compare to Flexispot or Uplift?

I've ordered from all three, so here's my honest scoring:

• Flexispot: The budget pick, $200+ cheaper per desk. Frames feel less substantial, and their warranty support took about four days to respond to us. For a home office? Fine. For a 400-person company? Risky.
• Uplift: Comparable quality, more accessory options. But the aesthetic is more industrial. The Jarvis, especially in bamboo, looks better in a professional office environment.
• Fully: The best balance of reliability, design, and service for our needs.

That said, if your budget is the hard constraint, Flexispot is not a bad call. I get why companies go there—budgets are real. But here's my general philosophy as a buyer: I'd rather work with a specialist who knows their limits than a generalist who overpromises. Fully doesn't try to be the cheapest desk company; they make sit-stand desks and they do that one thing well. That focus shows in the product.

What about the frame-only option?

This is the insider move if your company already has desktops you like. Buy just the Jarvis frame and mount your own top. We did this for our design team, who wanted custom walnut tops that Fully doesn't offer in their standard catalog. You save $150-250 per desk, and installation is simple—our facilities person needed about 25 minutes per desk.

One warning: match the frame dimensions to your existing desktop before ordering. I almost ordered frames rated for 24-inch depth without checking, and our tops are 30 inches. That overhang is fine on a fixed desk, but it amplifies wobble at standing height. Measure twice, order once.

How are delivery and assembly?

Fast, by office furniture standards. Most orders land in 3-5 business days, and packaging is solid. We've had one damaged shipment in over 40 orders, and Fully replaced it without argument.

Assembly takes two people about 30-45 minutes per desk, and the instructions are genuinely clear—which sounds like a low bar until you've assembled furniture from other vendors. Budget a full day for a 15-desk rollout, or factor in professional assembly. And note that freight costs keep creeping up, just like USPS postage—the forever stamp went from $0.63 to $0.73 over the past couple of years. Expect shipping to run $50-80 per desk.

What question should I be asking that I haven't thought of?

This one: when will you actually need these desks, and do you have a buffer?

In 2023, my CFO told me on a Thursday that we were onboarding 12 people the following month. I scrambled orders, paid rush freight, and spent a week apologizing to department heads because the desks didn't arrive in time. That experience changed how I buy. Now I keep one spare Jarvis in storage. It's saved us twice—once for a motor issue, once for an unexpected hire.

My advice: if you think you need five desks, order six. You'll use the extra one sooner than you think.