Fully Jarvis Standing Desk: What a Quality Inspector Actually Checks Before Buying

I review deliverables for a living — roughly 200+ items annually, everything from furniture specs to packaging to printed materials. When I started looking at standing desks for our office, I applied the same scrutiny. Here's what came up again and again, answered from someone who's rejected about 18% of first deliveries in 2025 due to spec non-compliance.

Is the Fully Jarvis standing desk discontinued (2024/2025)?

No — it's not discontinued. I've seen that rumor floating around, probably because Fully was acquired by Herman Miller in 2019 and some models got consolidated. The Jarvis is still actively sold on the Fully site and through Herman Miller's contract channels. I checked their inventory system directly (or rather, I asked our Herman Miller rep for a written statement) — the Jarvis Bamboo, Hardwood, and Laminate tops are all in production, including L-shapes and the extended 40" depth option. What did change is that some frame-only SKUs were quietly dropped in early 2024. That might be where the confusion started.

What quality checks would you run on a Jarvis before approving it for your office?

Three things I always verify:

1. Stability at standing height — I'd apply a 30-pound lateral force at the top of the monitor pole and measure the sway. Industry tolerance for dual-motor desks is roughly ±0.5" at 48" height. The Jarvis frames (especially the C-frame) tend to fall within that, but if you pair it with a heavy L-shaped top, you might want the commercial-grade frame upgrade. Actually, I'd check the spec sheet: the standard frame is rated for 355 lbs, the commercial for 485.
2. Finish consistency — On the bamboo tops, I look at the grain and color match across the panel. We once rejected a batch of Jarvis laminate desktops because the edge banding had a Delta E of 3.2 against the top surface (reference: Pantone color matching tolerance for brand-critical colors is Delta E < 2). The vendor corrected it at no cost after we flagged it.
3. Motor noise — I run a blind test: same desk with the standard motor vs the upgraded motor. Without knowing which is which, 7 out of 10 of my team picked the upgraded as 'more professional' — and the cost difference was about $40 per unit. On a 50-unit order, that's $2,000 for measurably better perception. I'd recommend the upgrade if the desk is in an open office.

What's the real cost — including shipping, taxes, and hidden fees?

I've learned to ask what's NOT included before what's the price. For the Jarvis, the base price on the website (say, $599 for a 60x30 laminate) doesn't include:

• Shipping: $49 flat rate for most orders (this is unusually transparent — most competitors add $75-125).
• Taxes: varies by state, obviously.
• Assembly: free if you do it yourself, or $150 for in-home assembly (scheduling dependent).
• Wireless charging grommet: $89 extra.
• Surge protector grommet: $59.

Here's the thing — a vendor who lists all fees upfront, even if the total looks higher at first, usually costs less in the end. I've seen quotes from Uplift and Flexispot that were $50 lower base but tacked on $90 for 'oversized package handling' and $30 for 'residential delivery fee' — hidden costs that bring the total above the Jarvis. The transparent price is the real price. (I learned this the hard way after ignoring a competitor's fine print and eating a $400 surprise.)

How long does delivery take?

Standard shipping for a Jarvis is 3-8 business days for the desk, and another 2-5 for the top (they ship separately). But that's from their warehouse in Michigan — if you're on the West Coast, add 2 days (circa early 2025, shipping times fluctuate). I'd recommend selecting the 'expedited' option if you have a firm deadline — about $25 more and cuts transit by 2-3 days. One caveat: L-shaped tops and custom colors (like Pantone-matched) add 5-10 days to production. I should note that during Q4 holiday rushes, everything slows by about 3 days — we saw that in our Q4 2024 audit tracker.

Is the Jarvis worth it for a quality-conscious buyer?

Yes — with a caveat. The Jarvis doesn't have the highest weight capacity (Flexispot's E7 line goes to 440 lbs) and it's not the cheapest. But what I value is consistency: every unit I've reviewed (we bought 12 for a pilot) had the same motor performance, same screw hole alignment, same packaging. That's rare. In 2024, I rejected two shipments from a competitor because the crossbars were bent on 8 of 50 units. With Jarvis, our rejection rate in 2025 has been zero. Worth the premium if you're ordering 10+ units and don't want to deal with replacements. If you're ordering one for home, the price difference vs. an AutNomad or Flexispot is maybe $100-150 — you'll recoup that in not having to return a wobbly desk.

Can you get a Jarvis with a custom color?

Fully offers a range of standard colors (white, gray, black frames — three bamboo and four laminate top colors). But if you need a specific Pantone match for brand consistency, you're out of luck with the standard offering. (Actually, they do offer custom laminate colors through their contract sales — you just need to submit a minimum order of 25 units and a Pantone reference. Expect a 3-4 week lead time and a 20% upcharge on the top.) For single-unit buyers, stick to the standard options — they're well-chosen and match most office decors. Industry color tolerance for wood grain is less strict than for solids, so even the bamboo tops are fine visually.

Should I buy the frame only and choose my own top?

Only if you're confident in measuring and drilling. The Jarvis frame is designed for their pre-drilled tops — the screw hole pattern is specific, and the control box mounting bracket aligns exactly. I've seen people try to pair the frame with a butcher block top from Home Depot — it worked, but they had to drill 12 holes and the cable management clips didn't fit. The result was functional but not as clean. And if you mess up the drilling, you've voided the frame warranty. My rule: unless you have a CNC router and a lot of patience, just buy the bundled top. The price difference (frame + separate top vs. bundle) is maybe $60 — not worth the headache. (I speak from experience — I tried it once, regretted it, and ended up ordering a replacement top.)

That covers the questions I hear most often from procurement teams and facility managers. If there's something I missed, drop it in the comments — I'll check with our supplier and get back to you.